MicroBoards Technology CopyWriter BluRay Series User Manual download pdf (Page 17)

BD-121

Appendix 2: Error Messages

If an error situation occurs during duplication, the display will show both an error code and an

error message.

Error

Code

Error Message Description and Recommended Solutions

200 Source Disc Empty

The master disc was detected and identified successfully,

but is blank.

Check the master to ensure it contains data.

201 Bad Master

The master disc is detected but can’t be identified.

Check the master disc for defects or errors.

202 No Targets!

All blank discs are missing once the job has already

started.

Verify that blank discs are loaded into the recorders.

203

Burner Mixed or

Firmware Version

Mixed

The model or firmware versions of all installed recorders

are not the same.

Drive may have been replaced. Contact Tech

Support.

204

Targets & Master Not

Compatible!

The master disc and target discs do not have the same

format.

Verify that the master and target discs are the same

format (CD master and CD blanks, for instance). You

can use Disc Info in the Utilities menu to verify the disc

formats.

205 Targets Not Blank!

Existing data has been detected on the target discs.

Verify the discs are blank, replace if not.

206

Targets & Master Size

Mismatch!

During Compare: The sizes of the master disc and

successful copies are different.

During Copy: The capacity of the blank discs is less than

the data size of the master.

During Compare: Contact Tech Support

During Copy: Use Disc Info in the Utilities menu to

verify that the blanks capacity is large enough for the

data on the master disc.

208

Targets are not RW

Discs!

The target discs are not Rewritable during an Erase

attempt.

Verify that each loaded disc is rewritable.

209

Master Disc is CSS

Protected!

The master disc is copy protected.

Copy protected masters cannot be duplicated.

210 Bad Discs!

The target discs are detected but cannot be identified.

Replace discs that cannot be identified.

211

This format can not be

tested!

Target discs during a Test attempt are DVD+R,

DVD+RW, DVD+R DL, BD-R, or BD-RE.

Disc formats listed above are not supported by the

test function.

251 Copy Audio Error

Applies to Mix Audio Tracks. An error occurred during

the Mix Audio process. Could be caused by either a

master error or a recording error.

Try a different master or blank disc.

252 Not Audio CD

Applies to Mix Audio Tracks. The master disc is not an

Audio CD.

Verify the master disc is an Audio CD.

253

Over Blank Disc

Capacity

Applies to Mix Audio Tracks. The total size of the

selected tracks is larger than the remaining capacity of

the target discs.

Select alternate track of smaller size, or remove

selected track.

1 2 ... 12 13 14 15 16 17 18

Comments to this Manuals

No comments

MicroBoards Technology CopyWriter BluRay Series User Manual Page 17

Comments to this Manuals

Related products and manuals for Media duplicators MicroBoards Technology CopyWriter BluRay Series