MicroBoards Technology CopyWriter BluRay Series User Manual download pdf (Page 10)

Microboards Technology, LLC

Microboards B.30

3. Compare

Compare OK: 7

Fail: 0 Diff: 0

Src:01 CD-RW

Total: 15.2MB

Tgt: 00 CD-RW

Identical

Microboards B.30

4. Test+Copy

Microboards B.30

5. Copy+Compare

Microboards B.30

6. Select Burn Speed

Microboards B.30

7. Select Source

Compare

The Compare function is used to compare the master disc with the

copied discs. The Compare function will only work with Data masters.

If your master disc has audio or video (VCD) on it, the Compare

function will not work.

To use the Compare function, press the ▼▲ buttons until 3. Compare is displayed.

Place your master disc into the reader drive and your copied discs into the recorder drive.

Press the ENT button on the controller interface.

The duplicator will now compare the copies to the master disc.

When completed, the display will read:

Press the ▼ button and the following screen will appear:

Press the ▼ button again and the following screen will appear.

Use the ▼ button to scroll through each drive that was used during

the Compare

Test + Copy

The Test + Copy function first simulates the burn to the media

and then burns to the media if the Test simulation is successful.

DVD +R and all BD media do not support test mode.

Copy + Compare

The Copy + Compare function first burns to the media and then

runs a comparison of the burned discs to the master disc.

Select Burn Speed

This menu option allows you to change the duplication speed for

each of the duplication job types. Available burn speeds will

vary, depending on the model of the recorder drives installed in

your duplicator. Press the ENT button to change burn speeds.

Since speeds can be set based on media type being used, press the ▼▲ buttons to navigate to

the media type whose burn speed you wish to change, then press the ENT button. Use the ▼▲

buttons again to display the burn speed you would like to choose and press ENT.

When you have changed the burn speed, press ESC to return to the main menu.

Select Source

Use this menu to select which drive will be used as the master

drive, in which you would load your master disc. By default, the

top drive is set as the source.

Press the ENT button to change the source drive. Use the ▼▲ buttons to navigate through the

drives, pressing ENT when the drive you want to use is shown.

It is not recommended that you change the source unless it is necessary to do so.

Additionally, you should never select the bottom drive as the source, as this drive is used for the

USB External Connection. If the External Connection is active, the bottom drive will not be

available and the source drive will be reassigned to one of the other drives in the duplicator.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

MicroBoards Technology CopyWriter BluRay Series User Manual Page 10

Comments to this Manuals

Related products and manuals for Media duplicators MicroBoards Technology CopyWriter BluRay Series